Call us 24/7+86 17359299796
My Header Store Notice
Call us 24/7+86 17359299796

Archives

Home / Articles posted by jonson (Page 3)
GE MRP683026 IS200SDIIH1ADB: Precision Engineered PLC Module for Industrial Automation
2025-01-24 BY
IN Industry trends

IS200SDIIH1ADB|Contact input isolation terminal board

Product parameters:
Input voltage range: 12-48VDC

Output voltage range: 5VDC

Output current: Max. 10A

Efficiency: greater than 90%

Dimensions: 170mm x 105mm x 32mm

Weight: About 120g

Operating temperature: -35°C to 65°C

Product Specifications:
The terminal board takes up two long sides of the board from side to side, with 36 screw connections available on each side.

A relay and cable connector are installed in the center of the board.

The board has no onboard suppression and relay status monitoring.

Solenoid power supply not included.

Each relay has a corresponding LED to indicate the voltage at both ends of the coil.

The board is 8.5 inches long and 8.1 inches wide.

Product series:
GE Mark VI system related terminal board series.

Product features:
Equipped with 12 type C dry contact output relays.

Connect to a VTUR, VCRC, or VCC processor board using a single cable.

A simplex board that does not support TMR applications.

Two DRLY boards can be connected to the board, with a total of 24 contact outputs.

There are two versions: H1A and H1B, where the H1A version has a higher power relay contact.

GE IS200TBAIH1CCC - Advanced Circuit Board for Industrial Automation
2025-01-24 BY
IN Company News

IS200TBAIH1CCC|Analog terminal board

Features:

With high performance

High reliability

Easy to install

IS200TBAIH1CCC is a high-performance analog terminal board, mainly used to connect analog signal devices. It has good anti-interference ability and high signal transmission efficiency.

The IS200TBAIH1CCC GE analog terminal board is a high-performance terminal board, which can be easily connected to various analog devices, such as sensors, actuators, etc. It has a high degree of reliability and stability, and is an indispensable part of industrial automation equipment. The IS200TBAIH1CCC is a device called an analog terminal board. This PCB or printed circuit board is part of the GE Mark VI series. Ge created the Mark VI and other series in the Mark family to control and automate the processes of gas and steam turbines.
GE IS200TBAIH1CCC - Advanced Circuit Board for Industrial Automation

The IS200TBAIH1CCC printed circuit board is a very long and thin device. The left half of the IS200TBAIH1C is occupied by two (2) black terminal blocks. Each block can contain up to twenty-four terminals, which are cube-shaped and made of silver metal. These terminals combine for a total of forty-eight terminals, labeled one (1) through forty-eight (48). Most of the area on the right edge of the IS200TBAIH1C is occupied by three (3) medium connector ports. These connector ports are arranged vertically on the right side of the IS200TBAIH1CCC. The long electronic components are arranged vertically in the center of the IS200TBAIH1C. Ten (10) potentiometers or variable resistors are evenly distributed in the center of the IS200TBAIH1C. Four (4) additional potentiometers grouped together are located in the lower right corner of the IS200TBAIH1CCC. At least nine (9) small black transistors are arranged along the right side of the central portion of the IS200TBAIH1C. The center of the IS200TBAIH1CCC is also placed with a series of at least twenty (20) red jumpers. Each jumper is used to join together at least two (2) small metal jumper pins. The middle part of the IS200TBAIH1C is also covered with many small black rectangular diodes.

General Electric IS200TBAIS1CED, Advanced Digital Control System Module
2025-01-24 BY
IN Industry trends

IS200TBAIS1C|Analog input/output terminal board

The IS200TBAIS1C printed circuit board is manufactured by General Electric for the Mark VIeS family of turbine control systems and turbine control system products. This IS200TBAIS1C printed circuit board, or PCB for short, was actually originally mass-produced by GE Energy, the alternative Energy gear subsidiary of the larger GE Automation Industrial Production. This IS200TBAIS1C PCB is better defined by the functional product description specified in its instruction manual as an analog input/output terminal board. The IS200TBAIS1C analog input/output terminal board is actually a modified version of the previously developed Mark VIeS turbine control system family; Modify the IS200TBAIS1 parent board by adopting the only Level C functional product revision.

Hardware tips and specifications

The IS200TBAIS1C analog input/output terminal board has a number of unique and interesting hardware features in its overall functional assembly, all of which contribute to its intended function in the Mark VIeS series assembly. The main feature of the IS200TBAIS1C board is that it provides 10 unique analog inputs and 2 analog outputs for the larger Mark VIeS controller assembly, all input signals can be configured as voltage or current signals with the IS200TBAIS1C analog I/O terminal board. The IS200TBAIS1C board is used in tandem with one to three compatible YAIC input/output packages that were developed for use in the same Mark VIeS turbine control system family. Now, some of the features of the IS200TBAIS1C analog I/O terminal board have been discovered to put its otherwise confusing set of hardware component inclusions fully in context, starting with the various input and output types accepted, including:

2 -, 3 -, and 4-wire transmitters simulate inputs
Externally powered transmitter simulates input
±5 V, ±10 V DC voltage analog input
0-20 mA analog output

While the various input and output types employed by the IS200TBAIS1C analog input/output terminal board are explained in great detail in the original product-centric instruction manual material, not much else is known about the IS200TBAIS1C PCB. In view of this, a breakdown of the functional IS200TBAIS1C product number is essential, starting with its IS200 series label. The IS200 series label beginning with the IS200TBAIS1C functional product number has the dual naming responsibility of the analog input/output terminal board; It is detailed as a common assembly model Mark VIeS series PCB manufactured at GE Energy’s plant site in Salem, Virginia. The IS200 series label is followed by the IS200TBAIS1C functional product number by the TBAI functional acronym; Create a convenient conversational or promotional shorthand alternative to lengthy IS200TBAIS1C product numbers. Additional information available by breaking down this IS200TBAIS1C functional product number includes the GE printed circuit board’s Class S special PCB coating style, its first group of Mark VIeS series groupings and its single Class C functional revision.

Schneider Electric BMXP341000H - High-Performance PLC Processor Module
2025-01-24 BY
IN Company News

IS200TBTCH1C|Thermocouple input terminal board

Ge’s IS200TBTCH1C printed circuit board product was originally designed and manufactured specifically for placing in its Mark VI turbine control system family. The IS200TBTCH1C device belongs to the Mark VI family, which should be indicated by its full extended product family name section, for a set of possible functional applications that exist specifically in the control and management systems of GE compatible gas, steam and wind turbine automatic drive components. Given that the Mark V series has not yet introduced alternative energy based wind turbine applications, this must be considered a greater functional advance than the previous industry-standard Mark V turbine control system series.
Schneider Electric BMXP341000H - High-Performance PLC Processor Module

Hardware tips and specifications

The Thermocouple Input (TBTC) terminal board IS200TBTCH1C is part of the Mark VIe series produced by General Electric. The board will accept T, S, K, J and E main Type 24 thermocouple inputs. If this board is used with a PTCCH2 board in a simplex system, the board can accept three additional thermocouple inputs, labeled R, B, and N. There are two TBTC models, this model is IS200TBTCH1C indicating that it has two DC type connectors and is only used for simplex applications. The board will use two PTCC packages, thus allowing 24 inputs. The IS200TBTCH1C device here on the IS200TBTCH1C personalised product page is mainly reminiscent of a visual inspection of the IS200TBTCH1C product itself, due to the small amount of material available for its online instruction manual. Therefore, the IS200TBTCH1C functional product number itself is really a good source of IS200TBTCH1C Board hardware component and component specification information, as it encodes various related IS200TBTCH1C details through a series of continuous functional naming components. For example, the IS200TBTCH1C product number begins with a dual-function IS200 series label, which entrusting the normal Mark VI series components of the IS200TBTCH1C PCB and its domestic manufacturing location. Some of the other IS200TBTCH1C details embedded in this media include:

TBTC Functional Products Acronym
The first group of Mark VI series groups
Three resistant PCB coating
Grade C Functional Product revision
When connecting an IS200TBTCH1C board that is part of the Mark VIe series, the I/O package used is inserted directly into the TBTC Type J connector, and the cable required also depends on the level of redundancy required for the board. A feature of the board is that the thermocouple input on the board can be ungrounded or grounded. The input can be up to 984 feet from the turbine control panel. An I/O processor attached to the device performs analog-digital linearization and conversion of the individual thermocouple inputs. The thermocouple input of the IS200TBTCH1C board can support a wide input range from negative 8 volts to positive 45 volts. The board has a cold junction and can operate in a potential range of minus 22 degrees to 149 degrees Fahrenheit. Cold end or CJ signals can be monitored by entering the signal space.

GE IS200TREAH2AED: Advanced Turbine Control Module
2025-01-24 BY
IN Industry trends

IS200TREAH2AED|An I/O module designed for the Mark VI series control system

Product overview
The IS200TREAH2AED is an I/O module designed by GE (General Electric) for its Mark VI family of control systems to capture and process analog signals from equipment such as turbines. It is usually installed in the control cabinet and is used in conjunction with the Mark VI controller to realize the monitoring and control of the equipment.

Product characteristics
Strong specificity: Designed for GE Mark VI series control system, highly integrated with the system.

High reliability: Industrial grade components are used to ensure stable operation in harsh environments.

Modular design: easy installation and maintenance.

High precision: provides high precision analog acquisition function to meet the requirements of measurement accuracy.

Isolation design: Each channel has isolation protection to improve system security.
GE IS200TREAH2AED: Advanced Turbine Control Module

GE IS200TREAH2AED
Product parameters (typical values, refer to the product manual)

Input type: Analog input

Number of channels: Varies by model and usually includes multiple analog input channels.

Input range: 4-20mA,0-10V, etc

Accuracy: High precision

Operating temperature: -20℃~70℃

Relative humidity: 5%~95% (non-condensing)

Protection level: IP20

GE IS200TDBTH6ACD: Advanced Discrete Board for Reliable Industrial Control
2025-01-24 BY
IN Industry trends

IS200TDBTH6ACD|Gas turbine control system module

Product parameter

Number of channels :16

Input type: Analog input

Output type: analog output, relay contact

Input range: Temperature: -40°C to 800°C; Pressure: 0 to 35 MPa; Flow rate: 0 to 1000 kg/h

Output range: Analog output: 4-20 mA; Relay contact: 250 V AC, 10 A

Accuracy: Temperature: ±0.5% full scale; Pressure: ±1% full scale; Flow rate: ±2% full scale

Resolution :16 bits

Update rate :1 kHz
GE IS200TDBTH6ACD: Advanced Discrete Board for Reliable Industrial Control

Communication interface: Ethernet, RS485

Power supply voltage :24V DC

Power consumption :10W

Operating temperature range :-40°C to 70°C

Protection level :IP67

GE IS200TBCIH1CCD: Contact Input with Group Isolation for Advanced Industrial Control
2025-01-24 BY
IN Industry trends

IS200TBCIH1CCD|Speedtronic turbine control PCB board

The IS200TBCIH1CCD is a contact input with a set of isolation plates. It is used in Mark VI Speedtronic systems. The IS200TBCIH1CCD is also available for MKVIe systems.

The IS200TBCIH1CCD connects to VTCC/VCRC or PDIA I/O packages, depending on the system it is used on. The board accepts 24 dry contact inputs. These are connected to the board terminals. Each has 12 barrier blocks. The board has a nominal floating excitation voltage of 125 VDC. Range from 100 to 145 Vdc.
GE IS200TBCIH1CCD: Contact Input with Group Isolation for Advanced Industrial Control

The IS200TBCIH1CCD has three D-shell connectors. These allow the connection of cable connectors. The connector is a 37-pin connector with latch fasteners.

Terminals on IS200TBCIH1CCD usually use #12 AWG wires per connection point. When maintenance is required, you can remove the wiring terminals from the board.

GE IS200TRTDH1CCC: Industrial Control PC Board for Advanced System Integration
2025-01-24 BY
IN Industry trends

IS200TRTDH1C|GE Mark VI Printed circuit board

The IS200TRTDH1C is a circuit board component manufactured by General Electric for the Mark VI system. The Mark VI is part of the Speedtronic family for the management of heavy-duty gas and steam turbines. Mark VI provides alert displays, process variable trends, and point control displays through its operating interface.

The IS200TRTDH1C is used as an RTD input terminal board. Physically, the board consists of two terminal terminals (each with 24 screws connected), two 37-pin cable connectors (female heads), and a bank of capacitors. The board’s code is “6BA00”. There is a shield strip on the left edge that connects directly to the side of the terminal. The board has two factory-drilled oval notches that allow for screw mounting, as well as several notches along the edge of one board.
GE IS200TRTDH1CCC: Industrial Control PC Board for Advanced System Integration

The IS200TRTDH1C is connected to the VRTD board and communicates via two cable connections. The I/O board converts the TRTD input into a temperature value (in digital form), which is then transmitted to the controller. The IS200TRTDH1C is a simplex board and does not support TMR applications.

The IS200TRTDH1C has no jumper or hardware Settings. However, the board does have a hardware limit check function based on preset high/low levels. It also has a software system limit check for generating alerts; These limits can be configured. Check the resistance of each RTD and compare it to its correct value. If it is high or low, a fault occurs. In addition, each connector located on the board has its own ID device, which creates incompatible failures that do not match.

GE FANUC IS200VAICH1C - Turbine Control Module for Mark VI IS200 Systems
2025-01-24 BY
IN Industry trends

IS200VAICH1C|Analog I/O board

How much load resistance does this IS200VAICH1C support?

When it drives a 20 mA output, the 1000 foot end of the IS200VAICH1C #18 wire supports load resistors up to 500.
What are the various LED indicators on this IS200VAICH1C?

The IS200VAICH1C has three LED indicators located on the top of the IS200VAICH1C. These leds on IS200VAICH1C are indicated by RUN, FAIL, and STAT on IS200VAICH1C.
What are the firmware options for IS200VAICH1C?

The firmware of the IS200VAICH1C includes a gas turbine compressor stall detection, which is performed at a frequency of 200 Hz on the IS200VAICH1C.
Which specific Mark VI series manual does the IS200VAICH1C use?

You can use the manual GEH-6421 with IS200VAICH1C. This manual is a Mark VI guide to turbine control systems. While this manual is not specific to IS200VAICH1C, the manual specifically deals with VAIC boards and IS200VAICH1C from page 35 of the manual.
About IS200VAICH1C
The IS200VAICH1C board assembly is part of GE’s Mark VI turbine control system. Specifically, the Mark VI turbine control System family is one of the most complex and advanced Speedtronic systems ever created by GE. This IS200VAICH1C device is considered a versatile model of the Mark VI turbine control system family as it can be used to create TMR (Triple modular redundancy) and simplex control systems for industrial turbine systems (gas or steam). However, most Mark VI components are now in their old state and are no longer supported by Oems. We at AX Control do our best to keep these products in our on-hand, ready-to-ship inventory so that we can fill orders faster when you need them most. As we all know, this larger Mark VI turbine control system family for the IS200VAICH1C device must be considered a functional upgrade over the industry-standard Mark V turbine control system family previously with similar full extension series titles. Because the Mark V Series only has a specific set of possible functional applications in the control and management systems of GE compatible gas turbine and steam turbine components.
GE FANUC IS200VAICH1C - Turbine Control Module for Mark VI IS200 Systems

Hardware tips and specifications

The IS200VAICH1C is used with a terminal board that can hold 10 inputs and 2 outputs. The board and its corresponding terminal board operate within the Mark VI VME processor rack and communicate with other boards within that location. Each plate is individually identifiable. The IS200VAICH1C board consists of a single wide front panel that includes three status leds and two clamps that remain in place once the device is installed into the rack system. The back edge of the board has two horizontal connectors. The circuit board itself consists of capacitors, resistors, processor chips, and other ics, transistors, and diodes. Most components are marked with the original manufacturer’s logo and their reference names. The code on the surface of the board will help with the positioning and wiring of the board. This IS200VAICH1C product is edited from the base product of its original Mark VI series of functional roles by installing an atypical Level C revision.

Installation and handling procedures are available through GE’s original manual or user guide. Please follow all safety procedures recommended in these publications. Read and understand the installation procedure before unpacking new components. This particular IS200VAICH1C printed circuit board product product does not usually appear in large quantities of original printed instruction manual material online, which is most likely due to its status as one of the more copyrighted GE logo product families since its introduction. Previously it followed a similar full extension series name to the Mark V turbine control system family. Largely due to the lack of documentation, the IS200VAICH1C functional product number itself can actually be isolated as a good supplemental source of IS200VAICH1C Board hardware component and component specification information. Because it encodes various related IS200VAICH1C Board details through a series of continuous functional naming segments. For example, the IS200VAICH1C product number begins with an iteration of the dual-function IS200 series label, which specifies the normal Mark VI series components of the IS200VAICH1C PCB above its more standard domestic original manufacturing location. Some other relevant IS200VAICH1C Board qualities demonstrated through this medium include:

VAIC Functional Products Acronym
The first group of Mark VI series groups
Conformal PCB coating style
The only C-level revision

General Electric IS200VVIBH1C/AB VME Vibration Card: Precision Measurement for Turbine Control Systems
2025-01-24 BY
IN Industry trends

IS200VVIBH1C|VME vibration board

Where is this IS200VVIBH1C VME vibrating plate product produced?

The IS200VVIBH1C VME vibrating board PCB was manufactured at GE’s factory site in Salem, Virginia.
What style Mark VI series version does this IS200VVIBH1C VME Vibration Board PCB have?

This IS200VVIBH1C VME vibrating board PCB uses the only Class C feature product revision.
About IS200VVIBH1C
The IS200VVIBH1C is a circuit board component manufactured by GE for the Mark VI system. The Mark VI was one of the steam and gas turbine management systems released by GE under the name Speedtronic in the 60s, 70s, 80s and 90s. As one of the last systems to be released in the series, Mark VI is also one of the most advanced. It is built with a TMR (Triple Redundant Modularity) architecture and has a PC-based HMI (Human Machine interface) that runs on the Windows platform. The HMI PC includes software specifically designed for turbine management, including fully programmable maintenance tools.
General Electric IS200VVIBH1C/AB VME Vibration Card: Precision Measurement for Turbine Control Systems

Hardware tips and specifications

The IS200VVIBH1C is used as a vibration monitoring card and can handle vibration probe signals from up to 14 probes connected to DVIB or TVIB terminal boards. These are used to measure differential expansion, rotor eccentricity, vibration, or rotor axial position. For additional information on probe functions and Settings, see the Mark VI Turbine Control System Guide (GEH-6421). The IS200VVIBH1C has a single-slot panel that connects to a component-dense circuit board. The panel has only three components, all of which are located at the very top of the cover; These are LED indicators labeled Run/Fail/Status. The surface of the IS200VVIBH1C consists of two backplane connectors (P1 and P2) located on the back edge of the board. The board has four other connectors designed to conduct wires and points.

The surface of the board has resistors, diodes, capacitors and inductors/beads. Some of these components also appear on the back of the board. Integrated circuits located on the IS200VVIBH1C include FPGA, RAM and SRAM chips. The installation process can be found in the GE publication above. Any capacitors, resistors, diodes, transformers, or integrated circuits on the surface of the base printed circuit board of this IS200VVIBH1C VME vibration board product are actually installed as part of the standard voltage suppression and regulation strategy. This strategy is standardized into the Mark VI series of the IS200VVIBH1C VME vibration board products. The IS200VVIBH1C VME Vibration Board device’s IS200VVIBH1C VME Vibration Board feature product number is important for the research purposes of this IS200VVIBH1C VME Vibration Board personalized product page because it was actually specifically designed by General Electric, Some key IS200VVIBH1C qualities of VME vibrating board equipment are represented through a series of continuous functional naming blocks. One of the blocks is the dual function IS200 series tag for this IS200VVIBH1C VME vibrating plate device, It indicates the normal Mark VI series assembly type of the IS200VVIBH1C VME vibration plate equipment and the domestic original manufacturing of the IS200VVIBH1C VME vibration plate product. Some other IS200VVIBH1C VME vibration board qualities are shown below, including:

VVIB functional products for short
Conformal PCB coating style
The first group of Mark VI series groups
Grade C Product revision

Menu
Call us 24/7+86 17359299796

Search for products

Back to Top
Product has been added to your cart