Product parameters:
Input voltage range: 12-48VDC

Output voltage range: 5VDC

Output current: Max. 10A

Efficiency: greater than 90%

Dimensions: 170mm x 105mm x 32mm

Weight: About 120g

Operating temperature: -35°C to 65°C

Product Specifications:
The terminal board takes up two long sides of the board from side to side, with 36 screw connections available on each side.

A relay and cable connector are installed in the center of the board.

The board has no onboard suppression and relay status monitoring.

Solenoid power supply not included.

Each relay has a corresponding LED to indicate the voltage at both ends of the coil.

The board is 8.5 inches long and 8.1 inches wide.

Product series:
GE Mark VI system related terminal board series.

Product features:
Equipped with 12 type C dry contact output relays.

Connect to a VTUR, VCRC, or VCC processor board using a single cable.

A simplex board that does not support TMR applications.

Two DRLY boards can be connected to the board, with a total of 24 contact outputs.

There are two versions: H1A and H1B, where the H1A version has a higher power relay contact.