Where is this IS200VVIBH1C VME vibrating plate product produced?

The IS200VVIBH1C VME vibrating board PCB was manufactured at GE’s factory site in Salem, Virginia.
What style Mark VI series version does this IS200VVIBH1C VME Vibration Board PCB have?

This IS200VVIBH1C VME vibrating board PCB uses the only Class C feature product revision.
About IS200VVIBH1C
The IS200VVIBH1C is a circuit board component manufactured by GE for the Mark VI system. The Mark VI was one of the steam and gas turbine management systems released by GE under the name Speedtronic in the 60s, 70s, 80s and 90s. As one of the last systems to be released in the series, Mark VI is also one of the most advanced. It is built with a TMR (Triple Redundant Modularity) architecture and has a PC-based HMI (Human Machine interface) that runs on the Windows platform. The HMI PC includes software specifically designed for turbine management, including fully programmable maintenance tools.

Hardware tips and specifications

The IS200VVIBH1C is used as a vibration monitoring card and can handle vibration probe signals from up to 14 probes connected to DVIB or TVIB terminal boards. These are used to measure differential expansion, rotor eccentricity, vibration, or rotor axial position. For additional information on probe functions and Settings, see the Mark VI Turbine Control System Guide (GEH-6421). The IS200VVIBH1C has a single-slot panel that connects to a component-dense circuit board. The panel has only three components, all of which are located at the very top of the cover; These are LED indicators labeled Run/Fail/Status. The surface of the IS200VVIBH1C consists of two backplane connectors (P1 and P2) located on the back edge of the board. The board has four other connectors designed to conduct wires and points.

The surface of the board has resistors, diodes, capacitors and inductors/beads. Some of these components also appear on the back of the board. Integrated circuits located on the IS200VVIBH1C include FPGA, RAM and SRAM chips. The installation process can be found in the GE publication above. Any capacitors, resistors, diodes, transformers, or integrated circuits on the surface of the base printed circuit board of this IS200VVIBH1C VME vibration board product are actually installed as part of the standard voltage suppression and regulation strategy. This strategy is standardized into the Mark VI series of the IS200VVIBH1C VME vibration board products. The IS200VVIBH1C VME Vibration Board device’s IS200VVIBH1C VME Vibration Board feature product number is important for the research purposes of this IS200VVIBH1C VME Vibration Board personalized product page because it was actually specifically designed by General Electric, Some key IS200VVIBH1C qualities of VME vibrating board equipment are represented through a series of continuous functional naming blocks. One of the blocks is the dual function IS200 series tag for this IS200VVIBH1C VME vibrating plate device, It indicates the normal Mark VI series assembly type of the IS200VVIBH1C VME vibration plate equipment and the domestic original manufacturing of the IS200VVIBH1C VME vibration plate product. Some other IS200VVIBH1C VME vibration board qualities are shown below, including:

VVIB functional products for short
Conformal PCB coating style
The first group of Mark VI series groups
Grade C Product revision