DS200ADGIH1AAA|The auxiliary interface board was manufactured by General Electric
General ELectric’s DS200ADGIH1AAA product is a printed circuit board originally manufactured for the Mark V family of turbine control systems, as described in the brief product description above. This DS200ADGIH1AAA printed circuit board, or PCB for short, the Mark V series, as you might have guessed from its full extended series name, has a range of specific applications in the management and control systems of GE compatible steam and gas turbine automation drive components. The Mark V series featuring this DS200ADGIH1AAA device, while related to newly developed turbine control applications, can still be considered obsolete overall, as it is GE’s legacy product line, discontinued in the years after its initial release due to obsolescent feature lines introduced by retailers. While generally obsolete, the Mark V was one of the last product families developed by GE, leveraging the patented Speedtronic control system technology that first appeared with the introduction of the previous Mark I series in the mid-to-late 1960s.
Hardware tips and specifications
As with any product offered in the Mark V family of turbine control systems, the intended functionality of this DS200ADGIH1AAA device is introduced by accepting a range of specialized hardware components and component specifications for its normal Mark V Series components. The GE auxiliary interface board DS200ADGIH1AAA has a 40-pin connector, 60 jumpers, and a 6-pin connector. The GE auxiliary interface board DS200ADGIH1AAA is also equipped with multiple test points. The board is 8 inches wide. The DS200ADGIH1AAA is 6 inches long and is designed to be installed in the driver’s board cabinet. It has four screws, which are aligned with the position of the board frame for installation with screws. As mentioned earlier, this DS200ADGIH1AAA product belongs to an older product family that is now obsolete. Because of this, it is not surrounded by any large amount of original printed online instruction manual material. In this case, the DS200ADGIH1AAA functional product number itself can be identified as a good primary source of hardware component and component specification information for the DS200ADGIH1AAA Board; Code specific details in a collection of functional named segments for the design. For example, the DS200ADGIH1AAA functional product number contains details about the normal Mark V series components of this PCB, its conformal coating style, and its three-fold product revision table, including three seemingly identical Class A product revisions.
The test point in the DS200ADGIH1AAA device assembly provides a method for testing the circuit on the board. However, only a qualified service provider can test the board. The vendor must have test equipment calibrated and designed for the task. The controls must be set up correctly, and the probe must be designed to work with the tester. Place the development board on a flat surface and place a protective bag under the development board. In addition, due to the risk of static electricity from DS200ADGIH1AAA Board service providers, a wristband must be worn at all times. When the wristband is properly installed, one end of the wristband is attached to your wrist and the other end is clipped to the metal leg of the workbench or table. It can also be attached to other metal structures. Static electricity is attracted to the metal ground and leaves the circuit board or your body. Another appropriate step to reduce static buildup is to avoid moving around while holding the board in your hand. The friction of walking causes static electricity to build up. This is especially true in cool, dry weather conditions. If you don’t have a wristband, you can also touch the static bag with the board onto a metal structure, such as a chair or metal table leg.
FAQ about DS200ADGIH1AAA
What is the size of DS200ADGIH1AAA?
The DS200ADGIH1AAA is 8 inches wide. The DS200ADGIH1AAA is 6 inches long.
How is the claw on DS200ADGIH1AAA marked?
The insert claw on DS200ADGIH1AAA is marked with EG1-EG4. On DS200ADGIH1AAA, they are located in a square format on DS200ADGIH1AAA.