DS200TCCAG1BAA|The I/O TC2000 analog board is manufactured by General Electric
As mentioned above, this particular DS200TCCAG1BAA printed circuit board product was originally manufactured by General Electric specifically for placement in its Mark V turbine control system family. As you may already know from its full extended series name, the Mark V series to which this DS200TCCAG1BAA PCB belongs has specific applications in popular and compatible systems for the management and control of automatic drive components for wind, gas and steam turbines. The larger Mark V series offered by this DS200TCCAG1BAA product is not the currently produced GE mark product series, as it was discontinued in production due to obsoletion within a few years of its release. The Mark V series of this DS200TCCAG1BAA PCB, although now obsolete as a legacy product line of GE, is still a respected product line because it is one of the last product lines of GE Mark. Utilizing its patented Speedtronic control system technology, which was introduced along with the Mark I series in the late 1960s. The DS200TCCAG1BAA PCB was not originally designed or developed by GE for its specific functional role; This will be the DS200TCCAG1 parent TC2000 I/O analog board missing all three important product versions of the DS200TCCAG1BAA device.
Hardware tips and specifications
The expected TC2000 I/O analog board functionality of the DS200TCCAG1BAA printed circuit board is introduced through the acceptance of a unique range of hardware components and component specifications by its normal Mark V Series components. The GE I/O TC2000 analog board DS200TCCAG1BAA has an 80196 microprocessor and multiple programmable read-only memory (PROM) modules. It also contains an LED and 2 50-pin connectors. The LED can be seen from the side of the board. The ID of the 50-pin connector is JCC and JDD. The PROM module DS200TCCAG1BAA on the GE I/O TC2000 analog board stores the instructions and firmware used by the microprocessor and programmable logic devices. This information is embedded in the PROM, can be erased, and the newer version is stored in the PROM. As with any Mark V Series PCB available here, this DS200TCCAG1BAA product belongs to a specific Mark V Series subfamily. Since the TC2000 label is inserted into the functional description of the DS200TCCAG1BAA PCB, it can be inferred that the DS200TCCAG1BAA product belongs to the TC2000 subseries of the Mark V series.
Fortunately, for the purposes of this DS200TCCAG1BAA personalized product page, many of the performance specifications and dimensions originally introduced for this DS200TCCAG1BAA analog board are described in the DS200TCCAG1BAA instruction manual above, identified primarily by its separate factory-printed naming label. Some of the connectors for DS200TCCAG1BAA PCBS include:
2PL TCPS board power distribution connector
3PL STCA, TCCA and TCCB board data bus regulation signal connector
JAA CTBA terminal board 4-20 mA output signal connector
JBB CTBA terminal board 4-20 mA input signal connector
JCC TBCA terminal board RTD input signal connector
JDD TBCA terminal board RTD input signal connector
JAR/S/T TBQA terminal board input signal connector
JC TCPS board power diagnostic signal connector
JEE connector
In the DS200TCCAG1BAA Mark V Series product assembly, each connector listed above is named by a combination of its factory-printed naming label, a specific Mark V Series compatible product, and the specific signal they are intended to transmit. This JEE connector for DS200TCCAG1BAA PCB is not yet named as it exists as a residual structure designed to be inaccessible during the specification function of the DS200TCCAG1BAA board and its larger Mark V Series automatic drive components. The PROM module can be removed from the integrated slot on the board. To remove the PROM module, insert a flat-head screwdriver into one end of the module, then gently lift the screwdriver and the module will pop out. Then, insert the screwdriver into the other end of the module and do the same. Immediately place the module into the ESD bag. When installing the PROM module, align the module with the slot to avoid touching the pins on the module. Press the module to install. Always wear EDS protection, such as a wristband, as the module is sensitive to static electricity. The information on them can be damaged or destroyed. In order to ensure that the treatment of the replacement board is the same as that of the original board, the modules in the old board can be removed and then installed on the new board. This way, the specification and firmware code will be the same.
FAQ about DS200TCCAG1BAA
What kind of microprocessor does DS200TCCAG1BAA have?
The DS200TCCAG1BAA has an 80196 microprocessor.
Analog I/O board DS200TCCAG1BAA What to do?
The DS200TCCAG1BAA is an analog I/O board for a general-purpose data processor that helps the DS200TCCAG1BAA communicate with all three controllers.
How does the producer interface connect to DS200TCCAG1BAA?
I > < Interface Connect to DS200TCCAG1BAA through CTBA card.