DS200TCTGG1AFF|For the Mark V series turbine control system
This DS200TCTGG1AFF simplex jump gate was originally manufactured for GE’s Mark V family of turbine control systems, which is now considered GE’s Legacy family, as it was eventually discontinued within a few years of its initial release. This DS200TCTGG1AFF printed circuit board, or PCB for short, the Mark V series, although it exists as a legacy family of GE, is also considered one of the final products of GE’s Mark series, and uses patented Speedtronic control system technology. And automatic drive components in gas, steam, and wind turbines. This DS200TCTGG1AFF printed circuit board is used as a simplex jump gate in its larger Mark V Series automatic drive assembly, as evidenced by the description in the original Mark V turbine control System series specification documentation. This DS200TCTGG1AFF PCB is not the original simplex Trip Board used in the Mark V series; This will be the mother printed circuit board missing three important revisions of the DS200TCTGG1AFF DS200TCTGG1 product.
Hardware tips and specifications
Like any Mark V-series component sold here, this DS200TCTGG1AFF printed circuit board utilizes its own set of features to introduce hardware components and component specifications. The GE Simplex Trip Board DS200TCTGG1AFF is equipped with 21 plug-in relays. It also features three 50-pin connectors and two 12-pin connectors. The ids assigned to the 50-pin connector are JLY, JLX, and JLZ. The ids assigned to the 12-pin connector are JN and JM. Given the low generality of the original specification for the DS200TCTGG1AFF device, the DS200TCTGG1AFF functional product number itself can be considered a good source of hardware identification for the original DS200TCTGG1AFF board. Starting with its DS200 series tag with a double DS200TCTGG1AFF board naming convention. The DS200 series label at the beginning of the DS200TCTGG1AFF functional product number describes the status of the device as a domestically manufactured printed circuit board and a PCB with the normal style of the components of the Mark V turbine control System series. Some other DS200TCTGG1AFF board-specific details embedded in the DS200TCTGG1AFF feature product number include the following DS200TCTGG1AFF PCBS:
Acronym for TCTG Functional Products
Plain style PCB coating
The first group of Mark V series products
Class A Functional Product revision
F-level secondary Function product revision
F-level artwork configuration revision
The ids of the 21 plug-in relays in this DS200TCTGG1AFF board assembly are prefixed with K and end with a number. The numbers are listed in order starting with 1. Some of these ids are K1, K5, K10, and K21. Relays snap into place on the circuit board and are helped into place by metal straps. To remove the relay, remove the metal wristband and pull the relay out of the connector. To install the relay, align it with the connector and press it into the connector. Then, clip one end of the metal band to the connector, place the metal band on top of the relay, and clip it to the other side of the connector. To replace the relay, the GE Simplex Trip Board DS200TCTGG1AFF must be removed from the drive. Talk to an engineer or installer who is familiar with the drive installation and is experienced with the power supply connected to the drive. Disable the power supply by disconnecting the fuse or by other means as needed. Before continuing, test the current inside the drive using a test device. Disconnect the cable from the circuit board and map the location of the cable so that you can connect the cable to the correct connector when reinstalling the circuit board.
FAQ about DS200TCTGG1AFF
Are all three revisions of DS200TCTGG1AFF products backward compatible?
Nooooo. Only the first two product versions of this DS200TCTGG1AFF Board are backward-compatible, as they both exist as functional styles for the Mark V Series product versions.