IC693CHS391|Digital input module
IC693CHS391 is a modular CPU mainboard. The baseplate is part of the 90-30 series manufactured by GE Fanuc. The device includes connection ports that allow the installation of modular cpus, I/O modules, and power modules. It has a total of ten (10) slots, of which one (1) slot is allocated to the CPU and nine (9) slots are allocated to the I/O module. Power sockets are not included in the number of slots and bus expansion ports. Since this is a modular CPU slot, it is assigned a node address of 0 by default, which can be modified with programming software. The system supports only one (1) modular CPU slot. Other slots in the system can be expansion or remote I/O backboards. The power supply is installed in the leftmost slot, which is not included in the slot count, allowing this baseboard to support more I/O. The CPU is only installed on slot 1 because the slot is particularly sized for CPU connections or special option modules, such as FIP bus remote I/O scanners. Slot numbers 2 and higher are particularly suitable for I/O or option modules. The extension or remote I/O baseboard connects to the extension port on the far right of the baseboard. The IC693CHS391 modular CPU backboards support up to four (4) or seven (7) expansion backboards, depending on the CPU hosted by the IC693CHS391. The base plate supports panel mounting only and is secured by screws and washers through the provided mounting holes.
The IC693CHS391 baseboard is an expansion baseboard manufactured by GE Fanuc with ten slots. It has a rated current of 420 mA and a rated voltage of 5 volts DC. It is equipped with a DIP switch. The expansion backboard is connected to the 90-30 series PLC along with other modules. The power module is inserted into the left slot of the mainboard. The IC693CHS391 baseplate is modular with an open housing. If additional features are needed, it can be easily installed and replaced or changed to a different type. The left side of the board has a power port, as well as connection slots for CPU and non-CPU slots. It also has a 25-pin female connector on the right side for connecting expansion and remote backboards. To connect to the remote baseboard, the IC693CHS391 expansion baseboard requires a cable less than 700 feet in length. The baseplate cannot be used as a single entity. It can be connected to a PLC device or a personal computer using a PCI card. It can connect up to seven cpus at a time, depending on the model of CPU being used. The IC693CHS391 backboard can be mounted vertically or horizontally, depending on the layout of the PLC or CPU. The ambient temperature should always be within the specified range. The board should be kept away from water splashes and sources of dust, dirt and harmful chemicals. The IC693CHS391 baseboard is certified to several global environmental and industry standards.
Description expansion backboard
Product Description Modular CPU mainboard
Currently 420 mah
Number of slots Ten (10) slots
Voltage 5 volts DC
Number of CPU slots 1 (1)
Connector 25 pin female head
Number of I/O slots Nine (9)