IC693PWR321|The load capacity of the power supply is 30 watts
Surge 4A peak, Max 250 ms
Part number IC693PWR321
Series 90-30 pixels
Brand GE Fanuc
Product type Standard power supply
The protocol supports RS485 interfaces
Nooooo. Output three (3)
Nominal rated voltage 120/240 VAC or 125 VDC
Input voltage range, AC 85 to 264 VAC
Input voltage range, DC 100 to 300 VDC
Input power 90 VA with VAC input; 50 W with VDC input
Output voltage 5 VDC: Max. 15 watts 24 VDC Relay: Max. 15 watts 24 VDC isolation: Max. 20 watts
Output power 5 VDC and 24 VDC Relays: Maximum 15 watts 24 VDC Relays: maximum 15 watts 24 VDC isolation: maximum 20 watts
The GE Fanuc IC693PWR321 is a power module of the 90-30 series. It supports the processing power of the Fanuc series 90-30 PLCS. It is located in the leftmost slot of the bottom plate. It is rated at 30 watts. It can be used with AC and DC power supplies. The voltage range of the input voltage source of the device must be between 85 and 264 volts AC or 100 and 300 volts DC. It offers different voltage outputs: 5 volts DC, 24 volts DC for powering the circuit, and isolated 24 volts DC for some modules to provide external power. It has a peak surge current of 4 amps for a maximum of 250 milliseconds. This programmable controller power device is robust and comes with a battery.
The IC693PWR321 module is fully compatible with any CPU model. The power module has passed the cULus and CE standards. It is designed to work in a Class 1 level 2 environment. The IC693PWR321 module has a power limiting function that immediately protects the hardware in the event of a direct short circuit. The power unit is equipped with 6 terminals for operator connection. It comes with enhanced diagnostics to track all events and updates for the operator. As a protective measure, smart switching fuses are built into the power supply unit. For communication, the IC693PWR321 module is equipped with an RS-485 serial port. Serial ports can be used to connect different peripherals and cpus/computers.
The IC693PWR321 can be powered by AC or DC power. This power supply has an AC input voltage range of 85-264 VAC and a nominal value of 120-240VAC. For DC supply voltages, the acceptable voltage range is 100-300 VDC, with a nominal value of 125 VDC. Its input power requirements are 90 VA (AC input) and 50W (DC input). It can withstand A peak surge current of 4 A for a duration of 250 ms.
The IC693PWR321 output power capability includes 5 VDC and 24VDC relay operation with a maximum of 15 watts; The 24VDC relay is up to 15 watts and the 24VDC isolation is up to 20 watts. The output voltage of the power supply is 5.0 VDC to 5.2 VDC, and the nominal value is 5.1 VDC. 24VDC to 28VDC for 24VDC relays; 21.5VDC to 28VDC, used to isolate 24VDC operations. It has overvoltage protection from 6.4VDC to 7VDC and overcurrent protection from 4A, with a maximum hold time of 20 ms.
The IC693PWR321 also has one (1) 9-pin sub-D connector RS485 compatible serial port. It comes with an internal fuse, GE catalog number 44A724627-109. This fuse may come from a third party supplier. Suitable replacement fuses are Bussman – 215-002 (GDC-2 or GCM-2) and Littlefuse – 239-002.