IS200SDIIH1ADB|Contact input isolation terminal board
Product parameters:
Input voltage range: 12-48VDC
Output voltage range: 5VDC
Output current: Max. 10A
Efficiency: greater than 90%
Dimensions: 170mm x 105mm x 32mm
Weight: About 120g
Operating temperature: -35°C to 65°C
Product Specifications:
The terminal board takes up two long sides of the board from side to side, with 36 screw connections available on each side.
A relay and cable connector are installed in the center of the board.
The board has no onboard suppression and relay status monitoring.
Solenoid power supply not included.
Each relay has a corresponding LED to indicate the voltage at both ends of the coil.
The board is 8.5 inches long and 8.1 inches wide.
Product series:
GE Mark VI system related terminal board series.
Product features:
Equipped with 12 type C dry contact output relays.
Connect to a VTUR, VCRC, or VCC processor board using a single cable.
A simplex board that does not support TMR applications.
Two DRLY boards can be connected to the board, with a total of 24 contact outputs.
There are two versions: H1A and H1B, where the H1A version has a higher power relay contact.