IS200STCIH6AED|Control board
The IS200STCIH6AED is a DIN rail contact terminal board for GE Mark VI series turbine control systems.
The IS200STCIH6AED is a printed circuit board (PCB) with many different components. There are two nickel-sized factory holes on the left and right sides of the board. There are also two factory drilled reinforcement terminal holes in the lower left and right corners of the board. There are two terminal plates with numerical markings next to the bottom holes. The top group is labeled 1-51 and contains only odd numbers, while the bottom group is labeled 2-52 and contains all even numbers. The top center edge of the board has an RS-232 37-pin female port. The board’s part number label is located on the lower right side of the board, between the corner and the large factory borehole. There is a white 3-pin jumper above the terminal bar on the top left side of the board. The PCB also contains 2 transistors, 91 resistors, 27 diodes,
IS200STCIH6AED is a PCB and should be handled with care. Anti-static procedures should be implemented to prevent any type of damage to the board due to the build-up and release of static electricity. Before installation, the board should be stored in an anti-static bag or box. When installing an IS200STCIH6AED, wear an ESD wrist strap. To help with installation, it is recommended to note down the wiring and cable locations on the old board to be replaced.